Airsoft Sniper Forum banner
1 - 3 of 25 Posts

· Registered
Joined
·
571 Posts
The stock KWA motor isnt going to pull the 150 fast enough. None of thus stuff can be done with stock guns, and with KWA if something fails, your pretty much limited to the stock KWA parts that failed you originally. You should do more research because you'll probably end up unhappy with the results.
 

· Registered
Joined
·
571 Posts
*Facepalm* I'm just not going to bother anymore. You appearently dont have the funding required to start this build. With the VN base you still need a way to mount a scope and bipod unless you want to avoid them, and then do all of the internal work and with two crucial parts your already spent more than your limit. My advice; buy the gun and run it until something fails and go from there with more money, or save up more and do research while getting the money to give you a clearer view of what your tackeling head on.
 
1 - 3 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top