[Hughesy3]

Hi guys I'm looking into changing the stock hop chamber and a shop has an aps2 chamber that look the same.Is this unit comparable to the rifle it's a wells l96 by the way... Any help and advice from the pros out there would be appreciated. I have been getting a few flyers and random groupings at ranges over 100'


Thanks hughesy

 

[acer34p3r]

If it's the PDI type 96 hop up, it'll work. There's one other, I can't think of what it is, but it's supposed to be an improvement over stock. However, if I were you, PDI would be a good idea, worth the money. I hated the idea of spending that much at first, but now I don;t regret it.

 

[lulukchoo23]

The APS-2 unit will not work in an L96. You have to get the L96 unit.

And, the other chamber he is talking about ^^ is the ASE hop up chamber, only available overseas. It's a hybrid of the PDI chamber and the extinct HP chamber.

 

[Hughesy3]

Thanks lulukcuco

That was just the answer I was looking for I'll source the pdi 96 type

 

[acer34p3r]

Get the PDI type 96 hop up chamber. Like stated up there ^^^ it's so very very worth the investment. Improves range and accuracy by a considerable amount with the right barrel and bucking.

 

[airsoftsniper321]

what barrel fits on the ASE hop up for a MB01
(495mm, 6.03)

 

[lulukchoo23]

Any AEG barrel will fit. Ideally, you would want to get either an AK length, G3 length, or M16 length (if you do M16, you'll need a barrel extension for the last few extra mm's)