Airsoft Sniper Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
113 Posts
On my gun, the stock holds the mag catch pretty tightly. Also, if you go to a hardware store and get stainless steel flatheads to replace the junky mag catch screw (mine stripped) then you can tighten it enough that your only shimming issue is the hop-up arm.

I never had a problem on my UTG L96 with the mag catch wiggling, but if what you said about the Maruzen is true, then this is a pretty useful little note.
 
  • Like
Reactions: Dorekido
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top