Airsoft Sniper Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
So I tried to take the barrel out of my L96 hopup, but I forgot to turn the hopup all the way down before taking the barrel out, and then when I went to put it all back together and fire, the BBs curve downwards when it fires. Anyone know how I can fix it?
 

·
Registered
Joined
·
824 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #6 ·
Okay if you get craptastic accuracy= The prongs on the arm is broken.
If you get no hopup shoots downwards= Maybe broken arm.
If you have tear or damage bucking=Should get very low fps. Or weird shots.
If you need a replacement chamber. http://www.ebay.com/itm/L96-Airsoft...ltDomain_0&hash=item33724547c2#ht_2976wt_1110

If you need a new bucking. http://www.ebay.com/itm/L96-Airsoft...ltDomain_0&hash=item4ab465cc3c#ht_2952wt_1110
So if the hopup arm is broken do I need a new hopup chamber or can I just fix the arm somehow? Thanks!
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top