Airsoft Sniper Forum banner

L96 trigger box question

2817 Views 6 Replies 4 Participants Last post by  Cheese Man
Ok, so I am getting a blank wooden stock for my l96. I will be cutting out all the holes and such.

I am wondering, I will need some sort of trigger guard for the gun, but on the l96 trigger, some random pin is just sticking out. Would cutting the pin off effect the performance of the gun? I know the pin is used at the TOP of the trigger box to guide the spring, so would removing the bottom end effect the gun in any way?

If you still are not sure, refer to this pic:

I want to remove the bottom portion of the set pin.

If it turns out that I cannot remove it, what would you suggest I do as a trigger guard for the gun?
See less See more
1 - 2 of 7 Posts
The only thing I could see happening is your trigger box cracking and if you plan to take it out it will be very hard to get back behind the spring guide or if it falls out... but if you leave it in you could just bend a piece of metal and drill a hole big enough so the end fits through it.
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.