Airsoft Sniper Forum banner

l96 upgrades

2700 Views 10 Replies 6 Participants Last post by  lullabY
Hey!
i have owned a l96 mb01 for a year now and i have managed to fully upgrade it. I have upgraded basically all parts and im hitting enemy players every 1.2 shots, maximum range i have hit with single shot is 110m, but usually i dont go over 90m, which is basically maximum for that rifle
List of upgrades(what do you think what, if neccery i would have to upgrade?):

--my rifle: https://airsoftpro.cz/en/airsoft-gun...ozka-od-detail
--trigger set: https://airsoftpro.cz/en/gun-parts-u....-gen.2-detail
--cylinder set: https://airsoftpro.cz/en/gun-parts-u...08-nikl-detail
--action army hop up chamber : https://www.airsoftzone.com/en/L96-H...y-18137en1335/
--m170 spring: https://airsoftpro.cz/en/gun-parts-u...560-fps-detail
--maple leaf 80 degree bucking : https://airsoftpro.cz/en/gun-parts-u...rane-80-detail
--maple leaf omega hop up nob: https://airsoftpro.cz/en/gun-parts-u...k-omega-detail
--action army inner barrel 6.01x455mm : Relvad.ee
--precision ammonition .43 bb : https://www.patrolstore.com/ASG-Accu...-0-43g-bb.html
--silencer adapter : https://airsoftpro.cz/en/guns-access...otocivy-detail
--silencer : Relvad.ee
--stock 30 round mags : https://airsoftpro.cz/en/magazines/f...-30-ran-detail
--a fancy after scope(originally for hunting rifles), but dont remember the name, so i cant tell you what it was, but it has 3-9 times zoom, 50mm lens, parralax, wind/elevation adjustment and illuminated reticle.

only thing left in stock is barrel spacers(i have taped barrel,couple of turns around barrel in same place, and put spacer on top of it so it will lock in place and hold thght. Should i upgrade spacers?
--Link : https://www.airsoftzone.com/en/L96-I...y-10826en1277/

also what bb should i use? right now im using .43 precission ammonition, which has nice quality, not the best, but pretty good to be honest.
See less See more
1 - 11 of 11 Posts
just did chronoing and i got 195ms and 4.06joules :), what springs would you suggest to get decent 150ms?
okey, so im gonna buy new inner barrel Lonex 6.03 407mm or 430mm, dunno yet
So i get maximum from my setup with .43g bb
Hi... I am curious, when you installed the action army hop up unit, did you touch the arm at all? Mine has a slight bit of play to it is this normal ?
With the m150 spring get the 430mm barrel.
Hi... I am curious, when you installed the action army hop up unit, did you touch the arm at all? Mine has a slight bit of play to it is this normal ?
What do you mean by hop arm beng off?
mine was all good and its the best hopup i have used so far.
With the m150 spring get the 430mm barrel.
Thanks for advice, will try it out and let you know what fps i will getin and how good this new setup will be.
Cheers
Do you know if them upgrades will work on a mb4410a? That hop up unit looks different to the mb ones that don't fit certain models(mine) so wondered if this one would.
All internals are different on that rifle Bubbles, none will fit.
just did chronoing and i got 195ms and 4.06joules :), what springs would you suggest to get decent 150ms?
Have you played with that? 4 joules will hurt much.
Have you played with that? 4 joules will hurt much.
I'm guessing OP is from Estonia and since I'm also from Estonia I can tell you that the rules here permit bolt-action sniper rifles to shoot up to 4J. We have a MED of 25-30m set. But yes, it does hurt. Not enough to injure someone wearing proper protection, though. Generally people with such powerful rifles have some experience and are not that trigger happy.
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top