Airsoft Sniper Forum banner
1 - 6 of 14 Posts

· Premium Member
Joined
·
3,434 Posts
It can be done. Its just going to be harder than it would be if you were a smaller person. The key to the ghillie is to attach natural vegetation. As long as you can blend into your natural surroundings, then you will be just as concealed as a smaller person. So If you are up to it, I say go for it ;)
 

· Premium Member
Joined
·
3,434 Posts
Yes, the boots and lower part of the pants is a tricky area. The problem is, if the jute goes down to the boots, sometimes you will step on the jute, and can fall, trip, stumble, etc. Therefore, I had to cut the jute so that it did not get in the way. However, now my boots are not concealed. I had originally planned on not making a lower half to the ghillie, and the way I look at it, the pants covered in jute is a "bonus". While the boots could give me away, it is not very likely. If possible, I try to cover my lower half in the vegetation attached to the ground to offer more "natural" concealment. This typically helps solve the boot problem. But when making a quicker hide, such as relocating, especially to a position with limited veg, it serves a much larger problem.

As for what is best if the ground is mostly leaves and little vegetation, a tan based ghillie with some browns is nice. My ghillie is a all year round ghillie and has some spots of green. However, it blends in fairly well given the ghillie is predominately tan. It has been dirtied up, and is a faded tan, and looks much more natural, and offers good camoflauge. For any ghillie, I recommend a tan base. Great for when vegetation is scarce, and can also work when vegetation is abundant, as a lighter ghillie can easily be made darker with some vegetation added here and there.
 

· Premium Member
Joined
·
3,434 Posts
I had been using some elastic bands that I wrapped around the netting and put veg inbetween and then closed the elastic over top of it. Worked, but after awhile, the bands started to slip apart, and fell out of the ghillie.

For awhile I just tied the vegetation to the jute itself. However, I am using a new technique that I think will have much better success.

My plan is to take rubber bands and sew them down over the netting (like I did the netting on the BDU) and apply shoe goo over top for durability. Then I am going to place the vegetation in the rubber band, and wrap the band around until its tightly wrapping the veg. This will not come apart, and should have much better success than I had with the elastic band straps. I could post pictures if you would like, but the camera is missing :'(
 

· Premium Member
Joined
·
3,434 Posts
Sure thing, I will post some pictures once I can find the camera.

The vegetation already has a natural look to it, being its found in nature. The jute and burlap acts as a filler for the spots that do not have vegetation. Roughly 60% veg, 40% jute/burlap is a good mix.

To pick out a good sniper hide, look at your ghillie and your surroundings. Depending on what vegetation you have added to the suit, you may or may not want to avoid setting up in certain areas. If you have time, and find yourselves in a position where you look out of place, add some veg from the area you are in now to help blend yourself in. If time is of the essence, simply avoid areas where your veg does not match. Fore example, if your ghillie is covered in ferns, do not try to hide in a open field with dead grass. But like I said above, if you have time and desire to hide/set up in the field, simply add/remove veg.

Also, when setting up a good hide, make sure you have multiple exit points. In case things get heated, make sure you have the opportunity to get out of their fast. If one exit is blocked, you will be way ahead of the situation, and will be able to retreat through another exit point.
 

· Premium Member
Joined
·
3,434 Posts
I play back near a farmland/woodland where there is a lot of different terrain such as open fields, dense woods, etc. I have been meaning to get out to Ambush Airsoft sometime this summer as this is the closest airsoft field to where I live. Its an hour drive there, but sure beats the drive to the next closest field which is four hours! (Yeah, I live out in no man's land).

If there is not a whole lot of veg, such as the area around my field, in the winter time, I would suggest making the jute dominant in colors to blend in with the area during that time of year. For instance, the summer months are extremely green with lush vegetation, but my ghillie shows only a hint of green. The dominant color is tan, but its been worn in and dirtied up, and is now a tanish brown, very natural looking color. The brown I used in the ghillie is worn and looks like the soil and the decaying leaves as well. This color combination serves more successful in the winter months, and helps blend the ghillie in even when vegetation is scarce.

Now when the summer months roll around again, just add some more vegetation and now you have a ghillie that can blend in with the green vegetation that has grown back up.

Basically, a tan based ghillie with some browns, and hints of green, can be successful all year round, and there is not much of a need to remove much to any jute at all.

I have been wanting to get some pictures up of my ghillie and I in this "winter" terrain where vegetation is scarce. It will show you that the ghillie can serve quite successful despite not having any veg, mainly because my color choice was a good one for this season. Just have to find the dang camera now. ::)
 

· Premium Member
Joined
·
3,434 Posts
I would absolutely love to be able to play at a CQB field. I would be there all the time. It makes me sad to think there is not much around here. If there was, I would have a CQB loadout together in no time.
 
1 - 6 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top