Airsoft Sniper Forum banner

Laylax 150 spring or 190 spring? I need help

12292 Views 17 Replies 8 Participants Last post by  zero
Hey, I have an l96 that I need a spring upgrade for. I already have a full metal trigger box because the plastic stock one broke, and I already have a metal spring guide and cylinder.

I cannot use evike for problems with payment, so I have to use airsoftgi.

The only two springs on airsoftgi I like are the laylax 150 spring and the laylax 190 spring. I really wanted the 170, but they don't have it.

I will be using .36g bbs.

I bought the utg upgrade kit to get the rod, guide, and a spring as well. But I don't think the spring is powerful enough to fire .36g bbs. I am out of town for 2 weeks and i ordered the upgrade set, and cannot test the power of the spring included in the set, but I know it does not give a significant boost.

So I am wondering, will the 150 spring work with .36g bbs where the stock spring cannot, and is the 150 spring the same power of spring usedin the utg upgrade kit. If the 150 spring is not a good option, I know the 190 spring will work perfect for .36g bbs, but I am worried that it might be a bit too high of fps.

Thank you for the long read, and I appreciate any help.

edit: I found a 170 spring on red wolf airsoft for a bit higher of a price. Still need help deciding
1 - 2 of 18 Posts
I believe I have a laylax l96 m170 spring laying around I Will shoot you a PM if I find it.
In Michigan bolt actions can run up to 550 fps with .2s. I'm pretty sure a 190 spring would put you over the fps limit on every field.

Sent from my DROID RAZR using Tapatalk 2
1 - 2 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.