Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
Ok, my DMR should hit at about 130m/s but it chrono's about 40m/s-80m/s.
Everything inside the mechbox is airtight so the problem is in the hopup system, only I cant figure out what the problem is :(.
So, throw in a some ideas what could be causing the problem. I've been working on the gun for 7hours straight and I'm soon gonna murder someone if I wont get it to work.
Thank you
 

·
Registered
Joined
·
114 Posts
Have you checked the airseal between the air nozzle and the hop-up? My brother had the same problem and it was because the lower and upper receiver would separate just enough to cause a leak where the nozzle and barrel meet.

Sent from my HTC_Amaze_4G using Tapatalk
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top