Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
114 Posts
Have you checked the airseal between the air nozzle and the hop-up? My brother had the same problem and it was because the lower and upper receiver would separate just enough to cause a leak where the nozzle and barrel meet.

Sent from my HTC_Amaze_4G using Tapatalk
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top