Airsoft Sniper Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter · #1 ·
Ok so I am thinking of getting M14 , But I dont want a 46" long gun to carry around all day..
So I am thinking SOCOM size attach a Suppressor on end so I can run longer barrel..
I am looking for 400 fps but as much range as I can get with out have the standard M14 length..

What would be good base gun...

Brad
 

·
Registered
Joined
·
1,045 Posts
If you plan to use a SOCOM16 with a supressor, so you can run a longer barrel as you dont want to run a long rifle, you may aswell get a 20'' barreled version as they'll both be the same length if you attach a 6'' supressor, and anything longer will be longer than a 20'', including its flash hider :shrug:

You realy dont need the extra inner barrel length as it doesn't affect the gun to the point you'd notice, infact Im fairly sure the TM versions both have a 430mm barrel inner regardless of outer length (can anyone confirm this for me? :shrug:),


So just get the SOCOM16 and stop worrying about length, it doesn't make it perform any better ( so the wife keeps telling me :lmao:)
 

·
Registered
Joined
·
239 Posts
Try r-hopping your barrel with a decent TBB 6.03. If your looking for more range then the average AEG.

---
I am here: http://tapatalk.com/map.php?4fdcun
- A.K.A "FD" or "Krew"
 

·
Registered
Joined
·
54 Posts
Discussion Starter · #8 ·
OK came across this TM SOC16 for sale heres whats in it , Any opinions on this build
EDGI 6.01 SOCOM length inner barrel
Prometheus double-torque gears
Guarder steel cut off lever
Guarder cylinder/cylinder head/piston/piston head set
Guarder version 7 spring guide
Guarder SP150
Guarder Black Hop Rubber, teflon taped
Upgraded high torque motor for faster trigger response
Wired for Dean's connectors
 

·
Registered
Joined
·
251 Posts
OK came across this TM SOC16 for sale heres whats in it , Any opinions on this build
EDGI 6.01 SOCOM length inner barrel
Prometheus double-torque gears
Guarder steel cut off lever
Guarder cylinder/cylinder head/piston/piston head set
Guarder version 7 spring guide
Guarder SP150
Guarder Black Hop Rubber, teflon taped
Upgraded high torque motor for faster trigger response
Wired for Dean's connectors
Umm.. I'm no expert (there are plenty of others who definitely are), but:

o_O Double torque gears with a high torque motor? So triple torque ;p?

1) Mosfet if running Lipo
2) Suggest 6.03mm inner barrel instead
3) Flat hop mod or R-hop
4) Sorbo pad
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top