Airsoft Sniper Forum banner

M16 DMR.

3165 Views 15 Replies 7 Participants Last post by  hoggie
I'm currently working on picking out the parts. Now, i've gotten a good idea of brands, but I need opinions.

Currently looking at:
SHS AEG (Helical) Gears 27:1 (Torque Set)
SHS High Torque Motor
SHS V2 Selector Plate
PDI 260% AEG Spring (Assuming it allows me to shoot ~520 FPS)
Modify V2 Cylinder Head
Stock Cylinder (Polished)
Systema Area 1000 V2 Spring Guide
SHS Shims
SHS Cut off lever V2
Systema 1000 Tappet Plate
Promethesus Hard (Helical) Piston
Not sure on piston head, need help there.

Looking for a solid DMR gearbox, not sure there. I'm looking at a Raptor Mosfet or something a long those lines.

Opinions? I understand SHS is a solid brand, so I did not hesitate to overlook them.
1 - 3 of 16 Posts
You should purchase a Burst wizard for it. If you didn't know already, it allows you to have bursts of 1- 7. And it's only $30.

Other than that It sounds good, but I would buy a back-up cylinder. Just in case
I would get the King Kong, one of my buddies uses the LV. But the King Kong has a few more abilities. It's $40 though.

***EDIT*** The King Kong is actually $60 on the official website.
I really don't know, But my friends LV is adjusted with a screw driver. There is no need for trigger pull until you actually want to fire.
1 - 3 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.