Airsoft Sniper Forum banner

M24 upgrade questions

4906 Views 17 Replies 7 Participants Last post by  csprod
Hey guys i'm looking at getting a classic army M24 military version and will want to upgrade to just under 500fps (sites limit for bolt actions is 500) and i was wondering if i got the advanced cylinder kit and a prommy 6.03 tb barrel what spring bucking and bolt handle will i need?
1 - 2 of 18 Posts
Dutton, you posted this list a few years back about upgrade parts for the m24:

FF-PSS2-TC First Factory - Teflon Cylinder for APS2 US$102.00 US$102
GD-APS2-03 Guarder Ultra Light Aluminum Piston for APS2 Series US$29.00 US$29
GD-PT-APS201 Guarder Taper Cylinder Head for APS-2 Series US$20.00 US$20
FF-PSS2-SG First Factory - PSS2 Spring Guide for APS2 US$30.00 US$30
FF-SP-150SP First Factory - PSS2 150 Spring for APS2 US$21.00 US$21
FF-PSS2-PH First Factory - PSS2 Piston Head for APS2 US$12.50 US$12.5
GD-PT-APS208 Guarder Steel Bolt Handle for APS-2 OR & SV US$36.00 US$36
Grand Total Cost: US$250.5

WCGshop is out of pretty much everything due to it being discontinued. Im looking to put my m24 right around 540 (550 absolute MAX) and was wondering if you knew where i could get these types of parts for around the same price. I looked at some pdi stuff but it would mean closer to 500 dollars...
Just in case any one else wants this list Dutton got it for me from Here it is:

First Factory Teflon Cylinder For APS-2

First Factory PSS2 Taper Cylinder Head for APS2

First Factory PSS2 Piston Head For APS-2

First Factory PPS2 Spring Guide For APS-2

First Factory 150 Spring For APS-2

First Factory 3 Element Piston for APS-2

First Factory Bolt Handle For APS-2 (Right Hand)

PDI Hop-up Chamber For M24 ( Adjustable Hop-up )

Total: $343.50 + Shipping

Thanks again Dutton!
See less See more
1 - 2 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.