Airsoft Sniper Forum banner
1 - 8 of 8 Posts

·
Premium Member
Joined
·
716 Posts
Both lists look pretty good. Remember though, you only need an APS handle if you get an APS specific cylinder, otherwise you can just use a CA style handle. I know that PDI makes both types of cylinder, along with a stronger M24 style handle, so just make sure you have the right handle to accompany whichever cylinder you decide.

If you use this type of cylinder:


You need this handle:


Whereas with this type of cylinder:


You need this handle:
 

·
Registered
Joined
·
207 Posts
Nice Dutton, do you teach preschool?

Just Joking

But in all seriousness, that is actually a good method because not every new guy on this forum is going to know what a "High capacity, Palstonite, teflon coated, bore up, reinforced, and whatever other crap a cylinder can be made out of.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top