I was about to make this lol and i have got the new series to test out (both delta and diamond upgrades)but have gotten strange results the autobot or diamond copy appears to have a smaller patch. After installing the bucking I noticed my gun was a tad quieter.I shot 100 rounds or so to wear it in and all seemed fine. After the 100 rounds i tried to take longer ranged shots but i couldn't see the bbs, I can only shoot in the evening but I didn't see my bbs through my scope. I tried taking off the airseal ring but that didn't help. Seems like ill go back to my normal diamond, Ill try the "decepticon" silly names imo :hehe:
That picture shows the bucking with full hop adjustment :/

EDIT: i noticed that maple(i think) said that you should be using 80 degree buckings for 150 m/s and up. Mabey thats the cause of my bbs not flying right? i ordered 70 degree buckings which are rated for around 400 fps i think, running 550
EDIT#2:The bucking is thicker that the older series and fits snug in my chamber, gives good air seal.
update:Just finished some shooting,the autobot is working, I think it needs to wear in some more. Some shots were off at 150ish feet and some were dead on i will be doing some testing this upcoming weekend

 

Hah now i am confused, not sure what one i ordered now

 

I'd go with the Monster diamond just because it is tried and tested and it is what most people use, there is little information on the new line so wait till more people state their findings

 

Pfff, maple leaf is good at confusing us. There is also the AEG monster series :shrug:

By the way, that chart is made by maple leaf, but dont listen to them. 80 degrees is too hard for 500 fps. And there is no way that a different bucking can give you more range and less accuracy, that's just marketing nonsense.

70 degrees monster (diamond?) seems to be the tried and proven setup, at least it's what I'm using :tup:

 

I second Reliku, I use diamond, and I love it

Sent from my SM-G920V using Tapatalk

 

Yes sorry I should have said not to listen to the fps to degree chart in the first place.
The chart was to show the difference between all the VSR10 maple leaf buckings

 

Interesting, would like to try macaron delta if it is in stock somewhere in the US.

Current Monster Delta: still trying to fix the nub or something else.

Razinger | The one, The only..

 

They have them at airsoft Atlanta
Maple Leaf Decepticons Hop Up Bucking 70-Degree VSR/GBB - VSR-10, WE, Marui Gas

 

I like the 70* myself for under 400 fps. Most get the 75* for that.

I would think softer would be better for more grip on the bb.

 

I got my Monster in the post, what one i don't know . I notice it looks smaller than my Stock VSR bucking, will this be a problem? i did start reading through another thread but it was 20 pages long and i didn't see this answered. Thanks guys

 

Probably the diamond then. It should have a split patch.

 

yeah there is a split, is that not the good one. Also i am sure its shorter than the Tm one.

Sorry edit, the post clearly says that it is the one i need, im just rushing posting at work.

 

Was thinking some teflon tape to bridge that gap. Has anyone noticed the short bucking or have I got a faulty batch. As always if theres a thread on this please link.

 

ML buckings are shorter, just teflon tape it :tup:

 

Oh the joys of a new Barrel. Gotta love remaking Spacers! luckily i have a load of youtube videos to catch up on

 

I got my Bucking a week ago and have been waiting 7 days now for my nub. Nothing has arrived and seller has gone silent.

Anyone know a UK seller that has Concave nubs for AA unit in stock?

 

I got my Bucking a week ago and have been waiting 7 days now for my nub. Nothing has arrived and seller has gone silent.

Anyone know a UK seller that has Concave nubs for AA unit in stock?

any concave nub will do. given that its ment for airsoft.
the AA chamber uses the same nubs as aeg's so no need to look for aa specific nubs

 

Cant even find those in stock anywhere, was really hoping to have it for this weekends skirmish but looking unlikely now.

http://www.milspecsolutions.co.uk/maple-leaf-omega-o-hop-up-nub.html

Unless this looks right, it says curved but its not a great picture.

 

yes thats one of them

 

Redwolf have some , but its more for delivery than the nub Haha. And since i already paid for one that didnt turn up its getting expensive, 20pound nub anyone

 

hey thats less than what i payed for mine >

got mine for 26 pund :hehe:

 

I will give it until tomorrow in hope my missing delivery arrives ,if not then order the one i linked. After all this i better be getting headshots at 1mile.

 

sure thing...

if you still have the money and papper work needed to import one of thease
AX - Accuracy International USA >

 

if i am complaining about 20 pound Nubs i doubt i would be buying that, even if i did have the paperwork. I didn't look but i am assuming its more than that

 

I paid 20 for the Maple Leaf nub and bucking for my vsr. That's with delivery too. I thought that was pretty good from Redwolf.😂

Sent from my SM-G920F using Tapatalk

 

I've got both the "autobot" and "decepticon" buckings on the way. I'll try and game the decepticon and post some feedback next Saturday if it arrives in time.

Going through suppliers websites, it seems like these new models may be phasing out the old Monster range.

 

oh right, will the hardness of the nub make much difference then

 

i had a chance to test out my autobot or which ever has the diamond type patch and noticed it wasn't as consistent as my diamond/monster hopefully you get better results.

 

Just picked up an autobot bucking and the patch is very different then the monster diamond
It still has the "diamond" part to it but it's completely different
Here is a pic comparing them
Yellow is autobot and black is monster diamond

Sorry for bad quality hopefully you can see the difference

Sent from my iPhone using Tapatalk