[Reliku]

Yup, the blue one works fine.

 

[ThatGuyIvory]

I'm honestly not sure which colour is it, whether it's blue or black.
All I know is that it's the hollow version of the Omega nub.
The full "Omega" nub I used to have was black.
It's on the way and I should have it later this week, I'll report back with results once I give it a go.

 

[Reliku]

ML makes two nubs, the black one and the blue one. The blue one is the hollow one

 

[ThatGuyIvory]

Yep, it's the blue one, though I think I should plug that hole. I put everything together just now with AA's hopup chamber and AA's 6.03 barrel and I've basically got shotgun-wide spread with one-in-ten being more or less on target.

I do realize the bucking has to break in a bit but I've got more chances with my G17 on the field at the moment.

 

[Occidio]

Should I still use 60 degrees bucking with 600fps or should I get the 70 degree?

And I have a Pss10 chamber in it and it uses AEG barrel, so should i use the bucking that fits a AEG barrel and not have to get rid of the bridge or do yi have to use the vsr version as there are other differences?
I do not really know what fits in the pss10 chamber, Apart from laylax own pss10 bucking

 

[Reliku]

Not sure, 600 fps is kinda pushing it. Might want to use 70 there :yup:

If you have a chamber that uses AEG barrels and buckings, then you just get the AEG ML. No need to file anything.

VSR buckings are only for VSR chambers (such as the VSR, L96 AWS or M700) and most types of pistols or gas blowback guns.

 

[Dimitri MdP]

Not sure about that particular gun, but generally you have two ML options for AEG type chambers.

You can use ML AEG buckings (recommended the new, coloured ones) with whatever AEG barrel you choose, or go for ML Hybrid / Hot shot bucking setup, which are AEG spec yet designed to be used with ML GBB inner barrels.

The ML hot shot + ML GBB barrel is the best combo for AEG imho.

For 600FPS I'd go with 70º... maybe even 75º.

 

[Occidio]

If you have a chamber that uses AEG barrels and buckings, then you just get the AEG ML. No need to file anything.

I do not quite know what an AEG looks . So du you think it's an AEG bucking?
The original bucking looks like my old VSR buking just longer.

http://img-cdn.redwolfairsoft.com/upload/product/img/LL-4560329178225-1L.jpg

http://img-cdn.redwolfairsoft.com/upload/product/img/LL-4560329178225-3L.jpg

And thanx for the help :tup:

 

[Reliku]

That's neither an AEG nor VSR bucking. It's proprietary.

My guess would be however, that a VSR-cut barrel with a VSR ML will fit the chamber. Possibly with some teflon tape to get airseal to 100%.

 

[Dimitri MdP]

Looks like some weird extended VSR-ish bucking. Definitely proprietary, you won't find third party upgrades for it.

I'd go for flat-hoping the thing, maybe a R-hop. But try to find a replacement OEM bucking as backup first

 

[Occidio]

okey. Thanx

 

[1tonne]

That is a Laylax VSR bucking. Or a copy of it.

 

[zinko]

Hello!
What cylinder head you use ? Because PDI cylinder head and nineball buckings I had 500 fps, but now with PDI cylinder head and ML bucking (inner barrel unbridged ) I haw 200 fps and very high air loss between cylinder head and bucking.

 

[Ding]

Hello!
What cylinder head you use ? Because PDI cylinder head and nineball buckings I had 500 fps, but now with PDI cylinder head and ML bucking (inner barrel unbridged ) I haw 200 fps and very high air loss between cylinder head and bucking.

That's strange. I have fantastic air seal between my PDI head and ML bucking.

What ML bucking are you using? What chamber are you using?

 

[Reliku]

AA chamber + teflon tape + ASP nozzle (the one with the O-ring on the nozzle tip) + ML diamond bucking has proven to yield 100% airseal with a 100% success rate in all guns I've built to date.

With different chambers and without teflon tape it's going to be harder...

 

[zinko]

That's strange. I have fantastic air seal between my PDI head and ML bucking.

What ML bucking are you using? What chamber are you using?

I use ML diamond bucking ( old style) whit AA chammber. Can i use PDI cylinder whit ASP nozzle? The thread on ASP will fit the PDI cylinder ?

 

[KillerDad]

I got the stock TM chamber and a pdi nozzel and it all seals perfectly with the 70 degree autobot. I am not using any teflon either. The bucking is really tight in the chamber

 

[ben65]

I am going to be ordering a ML bucking, but before I did I just wanted to have a check to make sure the nub will fit the chamber/bucking.
https://www.airsoftatlanta.com/products/maple-leaf-aeg-hop-up-tensioner-omega
Maple Leaf Diamond Rubber Hopup for TM / WE GBB Pistol & VSR 60 Degree | Airsoft GI | Largest Airsoft Guns & Tactical Gear Stores in CA, TX & VA. Largest selection on Elite Force, Krytac, Lancer Tactical, G&G airsoft guns & sniper rifle & Condor Tact
Will this bucking and nub fit together with an AA hop up unit?

 

[Dimitri MdP]

They will, as long as your barrel has the wide, open type window.

I'd just buy both from the same store, Atlanta has the Autobot series, which are the version of Diamond.

 

[ElCoco]

Maple Leaf Bucking Not Working

Hi, can I get some help?

I've currently got an AA Chamber and ML Autobots 70degree bucking on my 550fps VSR 10 and my shots are curving, to achieve such feat, I used a PDI barrel and un-bridged it, is it necesarry for the barrel to be filed perfectly straight for the bbs not to curve, or is that not important. I also don't use barrel spacers (I cant remove the one on my stock VSR) and the barrel has wiggle room, can that affect the curving too?

Thanks,
ElCoco