[chachaseeds]

http://www.airsoftgi.com/product_info.php?products_id=9275

http://arniesairsoft.co.uk/news2/wp-content/uploads/2011/07/image26.png

http://www.evike.com/product_info.php?products_id=36802

I'm a bit worried because the barrel looks like it's cut differently, if you take a look at the 2nd link it also apparently comes with a proprietary bucking. I'm considering this because the ASGI 6.03 TBBs for vsr10's are reportedly too fat to fit with a KA bucking. Have any of you had experience with this barrel?

I'm getting this for my BAR10, by the way.

 

[Cheese Man]

Everything I have heard says modify barrels are kinda awful.

I would stick to prometheus/laylax.

 

[chachaseeds]

Thanks. I know a prommy/laylax is the best, but I can't afford it. Would an asgi PE 6.03 TBB be do-able?
EDIT:
Actually, I can probably get a Prommy 6.05, it's on $50!
http://www.airsoftgi.com/product_info.php?products_id=6959

Would that be better than a ASGI PE 6.03?

 

[solarisjock]

i would go towards Madbull V2's instead, they are generally the runner up if you cannot get a Prommy/Laylax

 

[chachaseeds]

i would go towards Madbull V2's instead, they are generally the runner up if you cannot get a Prommy/Laylax

But do they sell vsr-10 cut/length barrels? I can't seem to find them.

 

[bitchtits]

Nope they only do eag barrels as far as i know

 

[Cheese Man]

Yup, that is correct. It isn't hard to modify it to a VSR cut though.