Airsoft Sniper Forum banner

Modify-tech X-Range hop up bucking design (2019)

8716 Views 13 Replies 6 Participants Last post by  AccurateDMD
Hi guys! I found this new bucking for vsr-10 rifles and gbb pistols. Looks like the autobot maple leaf bucking, But looks better.
This copy/paste is from the web:

New MODIFY X-Range Hop Up Bucking for GBB/ VSR-10
Posted By: Iveon: September 20, 2019In: Exposed, NewsNo Comments Print Email
Modify has successfully produced the most desirable HopUp bucking for snipers and Mk23 fans. The new bucking has a lot of new and interesting additions. And that is made by Modify the company that in my opinion has the best quality control and consistently produces best upgrades for us airsoft snipers says a lot. Cant wait to get one for my King Arms sniper rifle.

Some features of the X-Range Hop Up Bucking for GBB/ VSR-10 (70 DEG.)

Two Hardness Options
Special Airtight Design
Bi-Point Design
Superior Tear Resistance
Excellent Temperature Properties
High Abrasion Resistance
The X-Range has the remarkable feature of depressor as seen in ZED of the popular video game League of Legends.

With large area in the front end to effectively cover BBs and twin-point design in the back end to centrally position BBs, the two features combine to achieve maximum range.

X-Ranges, and how they affect your accuracy and shooting range

The X-Range design was inspired by the R-hop, with the goal of maximizing contact with BBs when the bucking is depressed. That increases friction to produce top spin as well as air seal inside the barrel to achieve maximum range.

The X-Range is bell- or cup-shaped with the wider end facing the loading nozzle.
With 2-stage channel, the X-Range’s bell configuration is shallow to deep. BBs are loaded into the shallow, narrow end to move to the mid-section where it is deeper and wider. Such channel configuration assures perfect BB positioning to also produce top spin to result in accurate trajectory. The shallow channel end of the loading nozzle widens when the bucking is depressed, increasing contact, friction with BBs. The bell opening has “wings” on either sides to form a bridge to the inner barrel window, being a solid, wide structure at the inner barrel entry to hold BBs that also prevents the rear section of the depressor from deforming. Friction against BBs drops dramatically when moved by air from the shallow to the deeper channel section, with BBs pushed straight along the channel by air to the bottom of the bell to enter the inner barrel with continuing top spin.


See less See more
1 - 1 of 14 Posts
Has anyone tested this bucking yet? Does it perform better than an autobot or Mr hop?
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.