[dutton]

Classic Army M24 Civilian (550 FPS)

Internal Upgrades
Guarder 9mm APS2 Bearing Spring Guide
PDI M24 Hop-Up Chamber
Laylax PSS2 APS2 Teflon Cylinder
Dees Customs 590mm 6.01 Tightbore
First Factory APS2 3 Element Piston
PDI 200% Spring
Laylax APS2 Air Seal Damper Cylinder Head
Laylax APS2 Power Accuracy Cup
External Upgrades
Guarder APS2 Steel Bolt
Burlap Wrap
Leupold 1 in. High QD Mount
Guarder M3 3-12x44
CA Harris Bipod
HurricanE APS Silencer Adaptor (14mm CCW)
Custom Paintjob
G&G SS-100 Silencer

Classic Army M24 Civilian (510 FPS)

Internal Upgrades
CA 300% Cylinder Set
PDI 300% Spring
External Upgrades
Rock Ridge Harris Bipod
Leapers 3-9x40 Reticle Intensified Rubber Armored Scope
Custom Paintjob

Maruzen APS 2 SV (550 FPS)

Internal Upgrades
First Factory Teflon Cylinder
First Factory Damper Cylinder Head
First Factory Zero Trigger
KM 509mm TN 6.04 Barrel
First Factory Neo Piston
First Factory Spring Guide (9mm)
PDI APS 2 Hop-Up Chamber
PDI SPR250 Spring
First Factory PSS2 Barrel Spacer
External Upgrades
King Arms Bipod
Leapers 3-9x40mm Scope
K2 Vanishing Silencer
Scope Mount Ring (Medium)
First Factory Bolt Handle
Custom Paintjob

Maruzen L96 (550 FPS)

Internal Upgrades
PDI Full Cylinder Set
First Factory Neo Piston
Laylax Damper Cylinder Head
Zero Trigger Set
Barrel Spacer
6.03mm Inner Barrel
External Upgrades
Custom Paintjob
Maruzen Bipod Set
Guarder Tripower Cantilever Mount Base
M3 3.5-9x40 Scope
Burlap Wrap

Primary Sidearms

WA Para Ordnance S.C.W H.R.T. V.3

WA Infinity MKII Pro Killer 5 in.

Internal Upgrades
CP Custom SCW 6.01 Tightbore
External Upgrades
G&G SS100 Suppressor

WA M92FS Perfect INOX

External Upgrades
Real Steel Houge Grips

KJW M9 2-Tone

External Upgrades
Custom Engravings

 

[pearldrummer919]

how's that Dees Custom .01 barrel? ive been thinking about one but i dont know anyone who has one.

 

[dutton]

how's that Dees Custom .01 barrel? ive been thinking about one but i dont know anyone who has one.

The first barrel they sent me was a complete POS. They asked me to send it back so they could further test it to figure out what was causing the problem, and the results were inconclusive. They sent me a new barrel and it appears to be much better - though I'm still breaking it in. They told me it would take about 500-800 round break in period. I've shot maybe 450 through this thing - the velocity increase thus far has been about 35 FPS and I'm easily hitting targets at 300 feet. I'm expecting the velocity to increase more as I get through the break in period.

 

[deadeyesniper]

Also, how do you like the neopiston on the type 96, I am going to order one very soon

 

[dutton]

At first, I didn't like the Neo piston, because I ordered a 3 Element piston and they sent me the wrong thing; I didn't feel like sending it back, so I kept it. I will say, it's lighter weight and quieter than the other pistons I've used in my guns.

 

[sniper117]

Very nice rifle collection

 

[deadeyesniper]

At first, I didn't like the Neo piston, because I ordered a 3 Element piston and they sent me the wrong thing; I didn't feel like sending it back, so I kept it. I will say, it's lighter weight and quieter than the other pistons I've used in my guns.

Well I think it has a air brake tech installed in the piston head to silence the gun, but does that lessen the guns performance?

 

[dutton]

[quote:jj9wasjs]At first, I didn't like the Neo piston, because I ordered a 3 Element piston and they sent me the wrong thing; I didn't feel like sending it back, so I kept it. I will say, it's lighter weight and quieter than the other pistons I've used in my guns.

Well I think it has a air brake tech installed in the piston head to silence the gun, but does that lessen the guns performance?[/quote:jj9wasjs]

Velocity-wise there was not difference between it and the PDI Hard Piston. Range-wise, not sure, I never really tested it, but if velocity wasn't affected, I wouldn't think range would be.

 

[thesoontobesniper]

hey is it true that the .01 barrel needs to be used with great quality bbs or your screwed. thats why i might get a .02 instead.

 

[dutton]

Any tightbore, and especially a 6.01 need the absolute best quality BBs on the market, otherwise you're asking for SERIOUS problems.

 

[dutton]

Bump for Updates!