Airsoft Sniper Forum banner
1 - 20 of 29 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter · #1 ·
Here is an update of my jg g3, with all the externals and internals currently installed. This was painted by are very ot man. For fuzzy I got some outdoor pictures.

Gun:

jg g3 $140

external upgrades:

1. Matrix Defender Type Tactical M4 / M16 Metal Flashhider $18
2. Matrix Full Metal RIS for G3 / T3 Airsoft AEG Series $65
3. Barska scope $75
4. G3 claw mount $18
5. Slim rubber rail cover $15

Internal upgrades:
1. Matrix/prometheus 6.03 tbb $30
2. Mad bull 60 degree shark bucking $12
3. SCS/PCS hop up spacer $7
4. Systema Bore Up Jet Nozzle for G3 $17
5. JBU tappet plate $12
6. Guarder bore up cylinder $18
7. Guarder bore up piston head $28
8. Guarder bore up cylinder head $25
9. CA reinforced piston $20
10. Systema m120 spring $15
11. Matrix spring guide $13
12. Double eagle high torque motor $35
13. AEG burst wizard mosfet $40
14. Matrix 7mm bushings $15
15. Assortment of random gears $free

DIY mods: (free)
1. Shimmed hop up
2. Shimmed gun
3. Tape on spring
4. Perfectly sealed piston head
5. Moved nozzle head one MM closer to bucking and one MM closer to cylinder head to increase air seal.
6. Sound dampening tape on holes of GB

Total: $618

Pictures:





This gun is extremely consistent and just fooling around I got a few 220 foot shots with a .28. The bore up, combined with the hop up, can easily throw a .40 past 200 feet. I'll be adding a video sometime this week of it shooting.
 
1 - 20 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top