Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
Well I have been working on a DMR project for a while and now I have gotten to the gearbox. I am going to do the things stated in that one thread, but my birthday is coming up and I wanted to ask for some internal parts. Any recommendations? The gearbox is a V. 2 G&G m4 gearbox completely stock.
 

·
Registered
Joined
·
104 Posts
Discussion Starter · #5 ·
Yes, I Know this is a necro post, but i haven't really been on for awhile and I thought this would be better than starting a new topic about the same thing. I still have the same gun, but I have installed a 6.03 TB M16 length (509 mm) and I have also put in an Element hop up bucking. I am looking for a little more accuracy and I need the fps to be around 395 fps with .20s, to comply with field regulations. Yes I know it isn't that high of an fps, but I just need to be able to hit things close to 200 ft no more. Alright now down to the point I am willing to put some money into this, but I am not really sure what parts you guys use to get the most bang for your buck. I know I need a new cylinder to go with the length of the inner barrel because it has 1 port in it and I would need one without any ports. What else would you all recommend?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top