Airsoft Sniper Forum banner
1 - 20 of 24 Posts

·
Premium Member
Joined
·
2,311 Posts
Discussion Starter · #1 ·
http://imageshack.us/g/840/img0126aj.jpg/

First one is my Kokusai SR-15, PDI 6.05 barrel, R-hop, modify hop chamber, booster's polishing mods, the works internally, externally it has a DTP Aluminum front set, a harris bipod with a homemade RIS adapter, and a Leupold Mk 4 3.5-10x40.

Second is my newly acquired VSR-10 G-spec, Laylax teflon cylinder, spring guide, z-trigger with piston, spring, EDGI ported barrel, nineball bucking, IR-hop/IER hop, and some other stuff, with a homemade sling and Tasco 3-9x40 scope

Third is my Kokusai CAR-15, booster tuned SCS, I have hits in excess of 60 meters in semi-auto at about 80 PSI (<400 fps) The mags even have trades, I tried getting a pic, but it didn't work.

Lastly is a family pic, enjoy!
 

·
Premium Member
Joined
·
2,311 Posts
Discussion Starter · #5 ·
Nope, I have two rings on there. I have the front set canted ever so slightly to put the scope right in front of my eye with my cheek weld, so the scope is connected to the front RIS.

I can use regular mags with the SR-15, the CAR-15 uses airfed mags. However, since the body is as old as it is (~10-15 yrs.), most mags don't fit, so they need filing down...
 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top