Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hello everybody. I have started my VSR build. it is nothing ridiculous yet but I soon plan to get it maxed out

So far what I have in to it is...
laylax 130 spring
firefly super soft hop up bucking
laylax 6.03 Tightbore
laylax red piston
laylax barrel spacers
laylax cylinder dampeners
and finally a friend of mine did a teflon mod to my cylinder head and I'm pretty sure my cylinder, which is now giving me near perfect compression.

Is there anything that you guys would suggest to put in to it? I think I am going to put in a reinforced spring guide stopper and a teflon cylinder.

Finally I have one question.
Would a PDI short stroke cylinder head work on the VSR pro sniper?
 

·
Registered
Joined
·
261 Posts
Hi,

Well if I were you, don't mix PDI and Laylax componets together. Well Teflon Cylinder is ok but not really neccessary. Try to fit an Antiblowby Ring for your Hopup Unit and shim your Hopup Arm.
 

·
Registered
Joined
·
205 Posts
Short stroke should fit, but would it not be a step backwards?
You've spent all that money fitting upgraded parts and then you want to fit a short stroke head which reduces the effect of the parts you've fitted... And all you get is a shorter bolt pull.
***I'm no VSR expert and have been wrong on numerous occasions***
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top