Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hey guys, so i've done so much research on this stuff, and i am finding so many different opinions on parts that i should get for this mb4402 Some people say that I should focus on the hop up first. Others say that i need to start with a better barrel, or trigger packs, or cylinder internals.

Im having some difficulty getting everything straight, reading so many different things on different forums. I've fully read the upgrade guides for the AWS L96, but i still don't know what to upgrade first to start getting what I want out of this gun. Some people say fps is everything, but only after certain internal upgrades.

Basically, i want to be able to nail a target from up to 200 ft away. I hear all these awesome things about certain brand parts that will allow me to achieve this, but can't seem to find any in stock.

Give me some suggestions guys! I could really use it!
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #3 ·
ranger

thans for your help. The compression i get from the stock barrel, cylinder head, and cylinder is actually really great. Since this post, I've actually ordered a few parts from airsoftpro, since they are the only ones who have everything i want. I ordered a steel cylinder, steel cylinder head, a new piston, spring guide, and spring (only a 140, because i am not ready to upgrade the trigger system yet). I have taken an AEG 6.03 that I've had just sitting around, and made vsr cuts into it, no problem (just to see if it would work). I think I am going to get a different barrel sooner than later.

I really appreciate your feedback. Let you know how everything chronos when I get it all.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top