[bad at usernames]

To start things off: This is my first build so I am learning everything from the basics to advanced (pls help) and so far so good. I am about to finish but after picking up a new spring from my local shop I now realize my current spring guide (the stock one) is too wide for the spring to fit. The spring I have is a laylax PSS10 170 and I was wondering if there is a spring guide to fit it. I have seen the laylax PSS10 spring guides but am wondering if they are 9mm or 7mm (I need the 7mm). I don't want to buy something I cannot use any info is appreciated.

 

[SP3CT3R]

The Laylax spring guides and springs should match.

 

[1tonne]

So will the Action Army spring guide match too and they are cheaper.

 

[KillerDad]

Bad at user names where are you from in missouri I am from Arnold which is just south of st louis.

 

[bad at usernames]

I am from Springfield and play at The Rock in Bolivar.

 

[KillerDad]

Nice. My in laws are about to move to branson next spring. The wife and I are talking about moving to Nixa in the next couple of years. I have heard a lot of good thing about the Rock. I have been wanting to go to one of their ops for awhile. But the drive for me would be quite long.

 

[GreatDane022]

I would highly recommend the LayLax spring guide. It fit both my sp170 and sp150 from LayLax. It worked perfectly and has a ball bearing bottom! It's super smooth. Here it is: https://www.airsoftatlanta.com/products/laylax-vsr-10-spring-guide