[logical]

I basically need someone to assemble a PDI hopup unit, Systema barrel and a Prometheus bucking all together so i can just drop it into my TSD SD97. If someone is knowledgeable on the unit and is a reputable member, please PM me if you're willing to do some work (of course, I'll pay).

Email me at brandonlee2012<at>hotmail.com or leave me a PM here so we can work something out.

 

[fuzzywolly]

Logical, there are a few members here that might be able to help you. Woogie is a reputable member that is very handy with this stuff. Maybe try asking him and see if he can.

However, I would recommend learning how to do it yourself. After a certain period of time, you are going to need to replace the bucking in the hop up unit. Do you really want to have to pay someone each time this has to be done? You should learn how to do it yourself. I was able to, and I am not exactly a handy man, or a "Bob-The-Builder" kind of guy.

On another note, please make an intro post, and check out the rules. Normally you are not allowed to post in the commerce section for a certain period of time but this is a different situation, so I will let this slide.

 

[netmarine180]

This is what I used a couple years ago, its best to do it yourself my friend.
Only guide I could find.
Pt.1:

Pt 2:

 

[hoggie]

Good Luck, I'm still not done with mine, I've messed up three times. Practice makes perfect

 

[logical]

Replacing the bucking is simple, that I can do. However putting the thing together is not something I wish to do.

 

[Cheese Man]

It just takes 3 hands and a foot. Just kidding. Just use 2 tiny screwdrivers to get the o-rings in, and you should be fine.

 

[dutton]

Send me a PM and I can help you of if you haven't gotten any other offers.