Looks sturdy.

The phrase "you will get more fps with it" sounds weird, maybe you are implying the using of stronger spring which this will be able to hold well or is it something else im totally ignoring?

Awesome that we get even more people to create custom parts, keep up the good work, i would suggest looking up the S-Trigger by Spriger, you could get good inspiration from it .

 

Yes it seems strange but look at this how much potencial space is between the sear and the spring guide stopper.spring is not fully compressed. My design allow to compress spring even more.

 

So where on your trigger system will the sear and spring guide stopper be? I may be interested in one. Potential

 

Waiting to see the $$$ amount. Might get one. Would be great if the came with a custom 90 piston too.

 

You may need to explain or show us in a diagram how it will increase the FPS.
With spring compression you will need to measure the spring wire and then multiply it by the amount of coils. This will tell you how much a spring can be compressed. - Maybe with a normal trigger the spring is already fully compressed.

 

On traditional triggers the sear pivots around the pin. When the piston goes backward the sear must lean so much that it comes out of the cylinder and after the piston ctatch passes the sear, sear flicks back in vertical position. So piston has few milimeters of space to move forward. I designed it so that piston stops just 1mm from spring guide (it is hard to tell ) i don't want to show you blueprints of the final shape for now because it is possible that someone will copy it

 

On traditional triggers the sear pivots around the pin. When the piston goes backward the sear must lean so much that it comes out of the cylinder and after the piston ctatch passes the sear, sear flicks back in vertical position. So piston has few milimeters of space to move forward. I designed it so that piston stops just 1mm from spring guide (it is hard to tell ) i don't want to show you blueprints of the final shape for now because it is possible that someone will copy it View attachment 3136

Yeah, someone should , like my picture ;-)

 

Hello Springer! Im sorry for using your picture but it is only one that is useful for explaining these things

 

Hi florjan, its fine. Looking forward what you will show us.

 

Thank you for your kidness! I only have to design how to mount safety switch. I will update

 

Update! So now i have all the needed parts only two still remaining. I only have to assembe it and then test. Pic

 

Update! I've redesigned the trigger (only side plates) so it took some time, but it is worth it. Next week it will be assembled if everything is like it should be.

Poslano z mojega Nexus 5 z uporabo Tapatalk

 

So you're increasing FPS by moving the piston catch farther back so that the piston will have more distance over which to accelerate before leaving the ported portion of the cylinder and beginning to accelerate the bb. Sounds like a neat project, and that prototype looks rock solid.

Slightly off topic, but I've wondered before about using this idea to build a trigger mech with two separate piston catches at different distances so that the rifle could shoot two different velocities depending on how far back you pulled the bolt. That way you could have a rifle shooting 500 fps (the second catch) for typical long range engagements, but which could also be short stroked to shoot maybe 300-400 (the first catch) to take shots which would normally be within your MED.

Of course it's unlikely that a big field would allow this since it would be virtually impossible to police but for friendly games with friends it could be a sweet set up.

 

Yes you understand it right. I really like your idea about two different velocities with that same trigger but whitout receiver modification it is impossible. However you gave me something to think about for future version. Today i will get chrono so expect some velocities comparison between traditional trigger and my new trigger.

 

I am very interested in this new trigger what will its name be? And will their be others in the future?


Thanks,
Jacob

 

I've thought about the name but i am not quite sure about it. Any ideas? Pre-orders will start soon, I just have to do some finishing touches.

 

Your best bet is to name it something that describes what the trigger does. This will automatically let people know that it is an extra ordinary trigger as soon as they see the title. If you just give it any old name like "Xtrigger", that does not describe it, then people will be less likely to investigate it.
I know that you can come up with a better name than this but it will give you an idea. So something like "Extra Power Trigger"
I know that name needs improving but it gives you can idea. You can work on it

 

Bull trigger "as strong as bull" hehe 😁

Poslano z mojega Nexus 5 z uporabo Tapatalk

 

I second "Bull Trigger". Its short and simple, and "bull" at the front of a phrase is something we are used to seeing as more powerful


....or the "No-Bull Trigger", lol

 

Update!
I've just tested the new trigger and fps incresed from 400 to 450 fps @0,2g.
So prototype is done so expect firs batch of triggers pretty soon.

 

Today i made a little improvement to my trigger and now it works so buttery smooth. Link:

 

Hi

Hi im starting to build one toó.. Would you help me sending me a blueprint of something like that?

 

Oh Jesus... He is doing a commercial product I doubt he will share anything with it.

 

Just my two sense, as soon as you send out your first models, people on this forum will be opening them up to see how they chooch. Then pictures will be posted, and your whole secrecy thing goes out the window. Unless you are planning on copyrighting the design in the distant future, you should just release pictures of the mechanism now. Just the mechanism mind you, not dimensions or CAD files. There are only a handful of people on here with the metalworking prowess to copy such a design, and all of them have good moral compasses. You might get more potential buyers (such as myself) if we could actually see the innards.


Sent from my iPhone using Tapatalk

 

Hey florjan what would be the price if your trigger unit,I live near you in Croatian do I'd be interested in buying it?

 

Im from argentina. I doubt i would be able to compete with him, im only interested in doing one for my own.. If you want i cant pay you a fee for the CAD an else

 

So my triggers are finnaly made and ready to sell. I have 8 unit avalible so if anyone interested contact me here or visit my website: http://flokipoki.wixsite.com/bulltrigger
So to quickly introduce you my trigger it is basically 90° trigger with reinvented locking system that allows for greater spring compression and higher velocity. It also has really durable construction with nice design and safety function. Here is also a review from my friend that test it for me, here is his review: http://www.airsoftsniperforum.com/3...es-parts-reviews/21401-90-degree-vsr-trigger-review-bulltrigg-made-florjan.html

Poslano z mojega Nexus 6P z uporabo Tapatalk