Classic Army M24
I've been building this thing for quite some time now. It's had my blood, sweat and tears put into it (don't let that keep you from buying it). I took the time to find all of the aftermarket parts in stock even when the only place they could be found was some hole in the wall retailer in the depths of Asia. This gun is one of a kind I promise you, the parts combination in this gun not only offer a high level of performance but also reliability. The only stock parts in this gun are the outer barrel and stock. The magazies fit snugly in the gun and need a small allen wrench to be taken out of the gun if you don't have long nails but honestly, who changes mags during combat with a sniper rifle? An easy solution is to make some magpulls. I re-tapped the threads for the trigger so now the trigger mech is attached with beefier flathead screws. The faux magazine cover has been removed in order to attach the included real steel magazine but I never got the project finished, the mag will need some modification to fit if you choose to attach it for that unique look. The gun has very few rounds through the parts currently installed, in the mid to low hundreds. I clean and lube it often as any highly tuned rifle should be. If you want a top of the line precision rifle then look no further.
This is a list of everything included:
-Classic Army M24 Civilian (bull barrel) with the following installed:
-First Factory steel bolt handle
-First Factory adjustable zero trigger (adjusts on two axes for perfect trigger pull)
-PDI two-way adjustable hopup
-Laylax PSS2 Teflon cylinder
-Laylax PSS2 3-element piston
-Laylax PSS2 Red piston head
-Laylax PSS2 SP150 spring
-Laylax PSS2 Cylinder head Pro (5 interchangeable nozzles)
-Laylax PSS2 7/9mm interchangeable spring guide
-KM TN 6.04mm tightbore (509mm)
-King Arms low profile bipod
-Karsten's Kydex adjustable cheek rest
-Classic Army M24 Tactical muzzle brake
-Replica Leupold M3 3.5-10x40mm scope
-G&P KAC style 30mm scope rings
-Remington Kwik Klip 10-round dummy box magazine
-A little under 1,000 rounds of Airsoft NW .43g bb's
-1 Classic Army M24 magazine (no follower)
-2 Maruzen APS2 magazines (one fully functional. one is sanded down, the follower can be installed in the CA mag for two working mags)
-Extra Laylax PSS2 stainless steel cylinder (used)
-Extra PDI vacuum piston (lightly used, comes with extra #10 o-rings)
-Stock CA 7mm spring guide
-Stock CA hopup
-Stock CA cylinder head
-Stock CA 7mm spring
-Stock CA barrel end cap
I think that's everything but I'll update it as I remember extra parts I have lying around. Considering this rifle has over $1,000 into it before shipping I'd like to get $700 for it. If you have an offer that's close, go ahead and PM me.
Buyer pays actual shipping cost. Paypal (with added 3%) or USPS money order accepted.
Don't worry fellas, I'm not leaving. Just yearning something new.
Oh yeah! Pictures:
![]()
![]()
![]()
I've been building this thing for quite some time now. It's had my blood, sweat and tears put into it (don't let that keep you from buying it). I took the time to find all of the aftermarket parts in stock even when the only place they could be found was some hole in the wall retailer in the depths of Asia. This gun is one of a kind I promise you, the parts combination in this gun not only offer a high level of performance but also reliability. The only stock parts in this gun are the outer barrel and stock. The magazies fit snugly in the gun and need a small allen wrench to be taken out of the gun if you don't have long nails but honestly, who changes mags during combat with a sniper rifle? An easy solution is to make some magpulls. I re-tapped the threads for the trigger so now the trigger mech is attached with beefier flathead screws. The faux magazine cover has been removed in order to attach the included real steel magazine but I never got the project finished, the mag will need some modification to fit if you choose to attach it for that unique look. The gun has very few rounds through the parts currently installed, in the mid to low hundreds. I clean and lube it often as any highly tuned rifle should be. If you want a top of the line precision rifle then look no further.
This is a list of everything included:
-Classic Army M24 Civilian (bull barrel) with the following installed:
-First Factory steel bolt handle
-First Factory adjustable zero trigger (adjusts on two axes for perfect trigger pull)
-PDI two-way adjustable hopup
-Laylax PSS2 Teflon cylinder
-Laylax PSS2 3-element piston
-Laylax PSS2 Red piston head
-Laylax PSS2 SP150 spring
-Laylax PSS2 Cylinder head Pro (5 interchangeable nozzles)
-Laylax PSS2 7/9mm interchangeable spring guide
-KM TN 6.04mm tightbore (509mm)
-King Arms low profile bipod
-Karsten's Kydex adjustable cheek rest
-Classic Army M24 Tactical muzzle brake
-Replica Leupold M3 3.5-10x40mm scope
-G&P KAC style 30mm scope rings
-Remington Kwik Klip 10-round dummy box magazine
-A little under 1,000 rounds of Airsoft NW .43g bb's
-1 Classic Army M24 magazine (no follower)
-2 Maruzen APS2 magazines (one fully functional. one is sanded down, the follower can be installed in the CA mag for two working mags)
-Extra Laylax PSS2 stainless steel cylinder (used)
-Extra PDI vacuum piston (lightly used, comes with extra #10 o-rings)
-Stock CA 7mm spring guide
-Stock CA hopup
-Stock CA cylinder head
-Stock CA 7mm spring
-Stock CA barrel end cap
I think that's everything but I'll update it as I remember extra parts I have lying around. Considering this rifle has over $1,000 into it before shipping I'd like to get $700 for it. If you have an offer that's close, go ahead and PM me.
Buyer pays actual shipping cost. Paypal (with added 3%) or USPS money order accepted.
Don't worry fellas, I'm not leaving. Just yearning something new.
Oh yeah! Pictures:
