Airsoft Sniper Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello guys, i tried searching the forum but did not find similar problem.

So i have the SSG10 and upgraded it with Rapax 3 spring, TDC pro and X-range 70d bucking.


Yesterday on the chrono it showed 3.8, 3.9J, 400+fps

Friend has the same gun, same upgrades done the same day, and it shows 3.2,3.3, 3.4j MAX that is our field limit for snipers (measured in joules in our country).

What could be the problem that is outputing so much power?
Few more notes: it has perfect seal litteraly everywhere, and prior this testing i havent been using it for 2 months, litteraly was in the box. (possible spring tension?)

Thx for advices!
 

· Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Do you have a longer barrel? Is your hopup set for the bb you plan to use on the field?
I have standard stock Novritsch barrel with supressor and stock piston. Hopup is set for the bb im using on the field, chrono is properly setup for measuring my bbs that i use. Barrel and hopup chamber is clean, cylinder cleaned + lubed.. Other people with litteraly completely same setup have normal power output 3.2, 3.3J

All is stock on the gun except Tridos.design TDC pro, xrange bucking + rapax 3 spring


My guess is the spring is just too hot. need to cut some coils.
 
1 - 2 of 2 Posts
Top