Airsoft Sniper Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,585 Posts
I just watched Nov's new ssr15 videos. What are your thoughts?
It seems OK but there are a few issues. For example, I can see his outer barrel wobbling about as he runs.

Sent from my SM-A505FN using Tapatalk
Yeah...the wobbling barrel gives it a greater area of coverage.>:D:lmao::hehe:
 

·
Registered
Joined
·
1,928 Posts
By the looks of things, if the SSR15 costs less than a standard Krytac or something similar, then it will be the next beginner rifle as you can get pretty much everything you need to start off with from his site, which would be awesome for a new player.
Honestly, his stuff isn't really that bad, it is just not as good as some of they seriously custom guns out there.
And those guns are usually double what his guns cost even if they are only slightly better.
For example, the SSG10 has its own small issues, but who expects their BAR-10 to perform well OOTB?
His new SSR15 will probably be a great beginner gun or great for someone that is scared of going inside of a gearbox.
That being said, the SSP1 sort of sucks and no one should start off being a sniper.

--------------------------------------------------------------------------------------------------------
My prize VSR-10

Base Gun Tokyo Marui VSR-10 G-SPEC
Power System Old Style Wolverine Bolt
Power System Upgrades Airsaver spring with 2 shims
Cylinder Wolverine Aluminum Cylinder
Barrel Airsoft Philosopher 6.04X475mm
Bucking Airsoft Philosopher 40º
Chamber Airsoft Philosopher CNC Chamber
Barrel Spacers 10 Spacers Made Of Solid Masking Tape
Mag Release Angel Custom (its really good!!!)
Banananananananana Spartan Doctrine 40mmX335mm With Special Cream
Battery Titan Power 7.4V X 350mah HPA Battrey
BBs BLS .45, BLS .48, Novritsch .46

DIY Mods
Stock Filled With Old Socks, Leather, Tape and Foam, Cylinder To Barrel Guide Sleeve Made Of A Seltzer Bottle, Dust Cover Made Of An Arizona Can, Short Stroked Cylinder, 90º Airline Fitting, 1/4 Extra Strong Airline

Future Upgrades
Homemade 5,000PSI Airstock, Carbon Fiber Outer Barrel, AirsoftPro Receiver, Maple Leaf Bolt Handle, Palmer's Pursuit Dual Regulators, First Strike First Stage Regulator, IER-Hop, Delrin Cylinder Sleeve, And A Possible Skeleton Stock Sort Of Like Plazmaburn's VSR-X

Where you can see my projects and related pictures
https://www.instagram.com/silicone_sword/?hl=en
 

·
Registered
Joined
·
1,585 Posts
As a rule of thumb, I put very little faith into anything off the shelf as being 'well put together'. Oh sure, you'll get a level of performance in that it'll work, but as a rule everything that comes across mybench gets stripped down and rebuilt completely. Sometimes I don't change any parts, but just make sure everything is lining up just so.
 

·
Registered
Joined
·
619 Posts
The only concern I really have is how well shimmed a factory gearbox is going to be.

Sent from my SM-A505FN using Tapatalk
Eh, if the CYMA Platinum series is of any indication, then even once considered "bad budget brands" have seriously upped their game to pretty impressive levels.

I don't really know if it's a matter of perspective or camera lenses, or it's really that wobbly, but so far the accuracy department is not really impressive. It just felt like it's all over the place, even whenever if it's a user issue or the rifle's own problem or not. (though it seems pretty windy while filming so there's that)
 
1 - 8 of 8 Posts
Top