Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3,975 Posts
Make sure your rifle is clean.
Tape off anyplace you don't want the paint to go.
Clean your rifle again.
Use Krylon paint, if you want it permant. Though I usually go with any type of paint, becuase when it peels and wears off it looks better ;)
Keep the can arount 6 inches from the rifle as you spray.
Spray in a nice even speed, keeping the can parallel to the rifle.
To slow and you will get drips.
To fast and it wont cover like you want.
A little fast you can always go back with another coat if needed.
Overlap your paint path by an inch or so.

The more you do the better they will look.
Just give it a try and see what you like.

If you mess it up, just get some paint thinner and take it off.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top