Airsoft Sniper Forum banner
1 - 20 of 25 Posts

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #1 ·
Well here she is guys.

Started off as a UTG MK96, and ended up into this. She currently has.....

PDI plastonite cylinder HD set
PDI 220 spring
PDI short fluted barrel
PDI AI muzzle break
PDI hop up chamber
Zero trigger
Madbull 6.03 V2 inner barrel, AK length
Center point 3-9x50mm




 

·
Premium Member
Joined
·
3,494 Posts

Absolutely beautiful. Great job Woogie, glad everything has worked out nicely for you. Love the external specs, and of course, the top notch internals. Paint job is also incredible!

Once again, nice work. Need I say more?

Fuzzy
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #3 ·
You could show me how much you like it by making a pay pal donation to me


I actually just got done with the paint and took the pic... Can't wait to get her out in the field.
 

·
Premium Member
Joined
·
3,494 Posts
I just finished up my rifle a few days ago. I was having some hop up problems. I had to play the last game with only my knife. I too cannot wait to field my rifle in the upcoming weeks.

Enjoy your fun ;)
 

·
Premium Member
Joined
·
3,494 Posts
I do not know the exact amount he spent, but it was not cheap. Woogie has put alot of time and effort into that rifle. The internal parts alone cost a bundle, not to mention, the externals were pretty expensive too. But it is not just the money that made that rifle great, its all the hard work woogie put into it day in and day out. Whether it was with tweaking the hop up, or giving it a new paint job.
 

·
Registered
Joined
·
63 Posts
yeah, I have the time to do plenty of tinkering and maybe not the talent to give it a good looking paint job. But the money is a problem for me. I'm very interested in that style of rifle, so hopefully I can get a price estimate
 

·
Premium Member
Joined
·
3,494 Posts
Pdi 96

Confused over here. You posted up another thread stating you did not have time to make a ghillie, but now you have time to tinker with a rifle? Also you said that you were on a budget.
A bolt action rifle is a very expensive route, easily $600-$1000. However, over time the rifle can be upgraded as you obtain more money. It can be a slow but totally worth it process.
 

·
Registered
Joined
·
63 Posts
Yeah I can see why you are confused. Tinkering with rifles is very easy for me, I tinker with a cheap VSR clone quite often, and thanks for the price estimate. Also I've tried making a ghillie suite and it proved to be very hard for me, something that took me hours and hours and I still didn't get it right. I'm sure if i had more time and money I could figure a ghille suit out, but as of right now it's not looking good.
 

·
Premium Member
Joined
·
3,494 Posts
To tell you the truth, tinkering with the pdi hop up chamber will take some time. A clone rifle has only one arm for adjusting the hop up. I could easily adjust the hop up of the clone mk96 (stock hop up) in about two minutes to get it where I wanted. The pdi hop up chamber has two arms that can be adjusted. Also, you have to install the o rings inside the chamber (somewhat annoying) and need to work with various parts that the clone hop up already has installed. The pdi hop up chamber is great but needs some serious tinkering to get it to where you want it.
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #14 ·
Been gone a few days sorry guys, am currently in Mm shooting my M2 50cal.. so typing on the phone.

The total rifle is close to a grand. Now the base I got as a gift so no money there, as well as scope and bipod already had. But yes sniping is not easy or cheap. I have it set now for 200 copy zero, but was getting 250 my last game while using .30 for ammo. Not to heavy and not to light, needing to get some SGMs to try or something similar. The rifle does like .40s as well.

But great rifle and I love it.


But if you want to het into this part of airsoft, start slow and build up a nice rifle. Because like fuzzy said , the trigger was $200 alone. The cylinder set was $220. The outer barrel, hop up, spring, and flash hider cost about $300. Then the cost of shipping and personal time and making sure my wife.was happy through it all. So you can see the price gets up there.
 

·
Registered
Joined
·
1,386 Posts
Looks great, I'd suggest a lowpro bipod though. Where did you get the bolt block screw from? I have a very similar one from the cheek rest screw in mine, had to drill it out slightly but its much better than that hollow cocking indicator screw.
 

·
Registered
Joined
·
3,975 Posts
Discussion Starter · #16 ·
I actually got it from my work place
It was from a piece of medical equipment that I work on. Was glad that it fit just right.

If you need one let me know ... I have a ton of them here at work that we usually just throw away. I did have to cut a little bit of it off to make it fit in the bolt flush. But it does work.
 

·
Banned
Joined
·
215 Posts
MOAR CAN!


I <3 Stubby rifles with long fat suppressors
 

·
Banned
Joined
·
215 Posts
I've already had my share of fun with L96's
 
1 - 20 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top