Airsoft Sniper Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
20 Posts
I have a PDI vsr-10 hop up chamber in my TM- vsr-10. I have an SCS nub installed in it as well with a ground-smooth bucking. I used thick 3M stick foam, did some very small measurments, and cut out tiny perfect size pieces (exacto kinfe) to secure my SCS nub in the middle (over the barrel window). Took some time, but Im satisfied with the results.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top