[Patrikrask]

I have lately been searching a bit on everywhere looking for if I could find my answer.
I'm basicaly wondering if the pdi 554mm 6.01 TBB will fit the stock TM chamber? Also, what's the big difference on the 554mm 6.01 TBB and the 554mm 6.01 TBB 10mm? I've heard it got something to do with vibrations but I couldn't quite figure it out :nuts: ...

And at last (!): I have a 430mm 6.03 TBB in my Vsr-10 atm. I'm considering upgrading to a 554mm 6.01 pdi but only if it fits of course.


If it matters, I run a 150 spring with the Laylax teflon ''basic'' setup.

Thanks!

 

[airsoftmaniacman]

I have lately been searching a bit on everywhere looking for if I could find my answer.
I'm basicaly wondering if the pdi 554mm 6.01 TBB will fit the stock TM chamber? Also, what's the big difference on the 554mm 6.01 TBB and the 554mm 6.01 TBB 10mm? I've heard it got something to do with vibrations but I couldn't quite figure it out :nuts: ...

And at last (!): I have a 430mm 6.03 TBB in my Vsr-10 atm. I'm considering upgrading to a 554mm 6.01 pdi but only if it fits of course.

If it matters, I run a 150 spring with the Laylax teflon ''basic'' setup.

Thanks!

All of the PDI VSR-cut inner barrels will fit inside the stock TM hop-up unit. However, the 554mm inner barrel will extend past the suppressor on the G-Spec model and past the outer barrel of the Pro model.

The 10mm outer diameter inner barrels have 10mm outer diameters compared to the 8.55mm normal inner barrels. In theory, it reduces vibrations, but that issue can be easily solved by using spacers. I attempted to purchase the 10mm barrels, but ended up going for the normal outer diameter barrels because the 10mm are not always in stock.

Additionally, larger diameter inner barrels have been shown to perform better at long range than the tighter bores.

If you look at 1tonne's guide, your barrel length should be purchased according to what weight BB you use.

http://www.airsoftsniperforum.com/41-vsr-rifles/6075-advanced-vsr-sniper-building-guide.html

 

[Patrikrask]

Awesome mate! I am aware of the barrel lengths and such when it comes the TBB being too long and I'm thinking of extending the Vsr Pro with a silencer.