Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
309 Posts
Discussion Starter · #1 ·
I was thinking of purchasing the PDI V2 Hop Up, I just had a few questions that I was hoping someone could clear up. The V2 Hop Up is only $72 and the normal PDI Hop Up jumps to $130 just because it comes with the cylinder head or am I missing something? So if I get the V2 I need an AEG cut barrel, PDIs are pretty high priced and I'm unable to find any other 430mm cuts. Does anyone else have some recommendations? And last but not least the bucking, I have a FireFly hard bucking would I be able to use this in the chamber?

Thanks,
Ping

Link to Hop-Up
 

·
Registered
Joined
·
20 Posts
You are correct on the first part. This is because the version 2 is designed to accommodate a non-tapered cylinder head. EDGI makes a good AEG barrel. There is really no way around a higher price for a good barrel. Most brands have the 430mm cut I believe, just shop around. Yes, you can use the FireFly bucking with the set up. (given it's an AEG bucking). Just be sure to use a normal nub.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top