Airsoft Sniper Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
I hope that this isnt a repeat question but whats the major difference between the two and is laylax worth the extra money for there zero trigger vs. the PDI V trigger?

Also if i get say a PDI Raven cylinder but a Laylax piston will they work together?

Finally what should be the first upgrades I get after the trigger I have this upgrade kit and my gun shoots probably 540 as a guess. It costs 50 bucks off AirsoftGI.

Sorry about the multiple questions I want your guyses experience answers before i go out and spend some 300 dollars thanks! :)
 

Attachments

·
Registered
Joined
·
909 Posts
I personally would go LayLax over PDI. The parts are easier to find, but they are both great brands. The thing I don't like about PDI is that they make some of their parts fitment different so that you have to buy more parts for them to work. If you know what you need though, it shouldn't be a problem.
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #4 ·
hmm okay I kinda wish Laylax had a cheap metal trigger though.... Id much rather save a few bucks for a heavier trigger pull just cause im used to the rial steal triggers so heavy pull is not much to me.

Sorry got on a bit of a tangent but i think Ill go with the zero trigger if i later do more upgrades like a PDI cylinder, guide hop up and a prometheus barrel will it all work together?
 

·
Registered
Joined
·
384 Posts
Mind I ask, why are you getting the zero trigger?
 

·
Registered
Joined
·
92 Posts
I have the metal triggerbox and it's holding up against 550 fps like a champ, but I wouldnt get that $50 cylinder kit, I had it and the piston was kind of crappy, now the spring is sucking, just spend the money on laylax cylinder parts, its worth it, airsoftextreme.com has good prices on all the parts you would need, oh and that $50 kit made my push FORWARD on the bolt hell because the pistons O ring would constantly bind up, now I can push my bolt forward with 1 finger because of the laylax parts.
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #8 ·
I already have the leapers kit so far its not too bad! Good compression good fps altogether its pretty nice. I opted out of the zero trigger and just went with the v trigger I was going to get the zerp trigger because I couldn't find the v trigger at any us based stores haha. I found it at airsoft atlanta for 190.
I'm also getting the PDI chanber and a pdi raven 6.01 inner barrel I haven't seen anything on here about it so ill post reviews. Also have madbull bucking soon to be ordered.... will laylax parts work with all of this like a laylax piston and guide?
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top