Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
283 Posts
Discussion Starter · #1 ·
Been digging around with barrels, and was wondering if anyone had experience with this barrel?

What is it's advantages/disadvantages compared to the PDI 6.01 and the Laylax 6.03?


Running a low fps setup, just a FYI. Between 350 and 375 fps, and I'd get the 303mm legnth barrel.
 

·
Registered
Joined
·
118 Posts
I have a few PDI 05 AEG barrels and they are superior to about any other barrel I've used & own(ed).

I get more range with a PDI 05 vs an EDGI 6.03 in the same gun. Not only range, but a very consistent, predictable flight path which equals accuracy when it comes to shooting a plastic 6mm bb. There was also a slight FPS gain with PDI 05 barrels. *over some brands even if the bore specs were tighter.

Now not sure if my experience will help you since it appears you want to know about VSR PDI barrels. I did have a PDI 01 303mm in a Gspec some years back. Accurate, but I was constantly concerned about jams. Don't really recall ever having any issues with the barrel though.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top