[metallicafatcat]

It seems like your just trying to throw money at it, which won't work. The gears and motor will just be a waste of money as well as the piston. There's nothing wrong with the stock parts, you should see what you have in the gun first, and then order parts.

 

[metallicafatcat]

It'll depend on the base gun. I've run stock JG parts way beyond stock level.

 

[metallicafatcat]

I will open it up and take a look at it, but I'm skeptical that stock JG gears and motors can take an m150 or m160 spring. I also doubt that both the gears and motor will be high torque, although I may go with a standard gear ratio to keep trigger response decent.

And even if the stock parts could handle it, something tells me I'll be replacing them quickly.

If you get one of the JG Red or Neo blues you'll be fine, as well as the gears. Pistons can take abuse along with the heads. If your replacing them quickly, your doing something wrong.

 

[metallicafatcat]

Don't use helicals... just don't...

 

[metallicafatcat]

That piston is bad to begin with...

 

[metallicafatcat]

Full metal racks are normally a bad idea as well. Look into SHS pistons.

 

[metallicafatcat]

Whoa , whoa whoa. There is no need for half tooth pistons. They're dinosaur tech and none of the half-tooths are any good except the Prometheus which are expensive, and overly heavy.

 

[metallicafatcat]

Then you need a new gear set.

 

[metallicafatcat]

You have half a tooth supporting an entire gear train on a decently strong spring... not that complex.

 

[metallicafatcat]

The gears you linked are very good. A regular piston should release of of your stock gear set. Not to be mean, but the way you word your sentences is very confusing and hard to understand.

 

[metallicafatcat]

Your gears should be fine. Most gear failures are due to poor shimming.