Airsoft Sniper Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
571 Posts
Discussion Starter · #1 ·
A contact in Japan that I know has been working on this for a little while now, and the fact that they posted it on their website and have a very nice picture of it may be soon to come. Just wanted to share it with you guys. Also, it is stated that it will be made for the Maruzen APS system so us M24 users should be able to use it too. Here's a link.http://airsoftresearchsyndicate.com/arsite/index.php?route=common/home It's not clickable, but it shows a good deal of the system.
 

·
Registered
Joined
·
807 Posts
Hate to break it to you guys, but thats just a 3-way pneumatic solenoid valve that is biased to closed with what is basically a MOSFET on the trigger to actuate the valve electronically. In other words with some tinkering and the right regulator (i.e. http://www.genuineinnovations.com/ ) you can make your own. The reason that things like this are not common is that they are very inefficient systems when set up like this, and snipers wouldnt want to carry a really large tank; maybe not paintball sized, but larger than your typical 12g CO2.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top