Airsoft Sniper Forum banner
1 - 18 of 18 Posts

·
Registered
Joined
·
536 Posts
Discussion Starter · #1 ·
Weird problem probably caused by the trigger having some kind of issue..I wanted to record this to show you guys since it has been over an year since I last used this rifle and I am more afraid to break stuff than to fix it ;) I don't actually remember where things were supposed to be and how.

Any help is highly appreciated!

 

·
Registered
Joined
·
536 Posts
Discussion Starter · #4 ·
Thanks man! I think that is the problem and that is why I will open the trigger entirely eh eh tomorrow probably!

Thanks Cheese will do. You beat me to cell phone typing eheh
 

·
Registered
Joined
·
536 Posts
Discussion Starter · #6 · (Edited)
..and solved! I think the plate pull spring got mis-aligned or something..anyway I took the chance to spend an afternoon with my trigger, completely disassembling it, removing silicon oil excess (from where I had no other lubricant), checked trigger sensitivity, re-greased, sanded off some smudges in the impact plate etc. etc. etc.

Not only the trigger works, but I had the chance to work on the bolt and now it's working wonders. For the sake of getting the feeling of this rifle back, I put the PCS valve at 50% and reinstalled the stock striker spring.

The 29 round magazine I fired was a pleasure to the eyes and ears. I got approximately 27 hits on a coke can at 35 meters, from a standing unsupported position. I can notice that the spacers I put keep the entire barrel much more firm during the gas output..plus cleaning the barrel, aligning the scope to the horizon, and mostly the long magazine being SO much more consistent (will never use the short stock one again, it's probably the most inconsistent magazine of ALL gas rifles) turned it into a beastzor.

Still, this mofertucker shoots hot as hell, judging from the time between the bang and the ding.

..AAAND HE'S BACK!
 

·
Registered
Joined
·
536 Posts
Discussion Starter · #8 ·
Still don't have it but will do soon.

The lack of blow back on the bolt action is something that bothers me.. the sheer power of the upgraded platform will make it up for it..along with the low sound profile and 'oomph' that is caused by the magazine gas release.

But..what are blowback engines? My other rifle and pistol are GBB and I would GBB all day long of BASR had that possibility!
 

·
Administrator
Joined
·
6,266 Posts
I also don't think it will be better than BV guns but I still want one, a few weeks ago I went to a friends house for testing some of my guns, he's a GBBr guru, he also has almost all "gas in mag" GBBr and I test all of them... Man that WA's some experience I must say, the WA and WE Scar had the biggest recoil but I loved the WE M14!

The only BV's I have with recoil weights are the JAC XM177 and the Sheriff that's with Booster! The Sheriff and ANGS have the LRB and antirotation setup but no recoil weights :(


Wolf
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top