[woogie]

are you sure that you got all the springs back inside the hop up chamber? Right where the bbs load there is a black thing. There should be a small spring on top of that keeping it pushed down.

Not sure what to tell you. As I have not had any troubles with mine. Just make sure that all the springs are there. Could just be a faulty mag as well. You have extra mags or is it the one that came with the rifle?

 

[woogie]

You could try to sand the top of the mag off a little bit. Either that or get a few spare mags and see if that will fix it. Because spare mags are only like $12 a pop... so not to much there.

I do know that the VSR mags are a little long to fit in the BAR so some sanding is needed.

 

[woogie]

Well first off .... Weclome to the fourms.. I suggest that you head over to the introductions and make a thread there.

But as for your rifle I have heard of a few of them having this problem. It could be that your sear isn't ingaging propperly. You said that you haven't taken anything apart? How long have you had the rifle?

Durring your battle did you drop it or bash it on anything? If it is still fairly new.. I would suggest that you contact the company that you bought it from and try to get a new one.

 

[woogie]

Check around for some pics of the trigger box. There may be a spring that fell out. There should be a part that "pops up" to engage the piston.

Now I haven't actually taken appart my trigger box... but let me see if I can't find you some pics...

 

[woogie]

I have looked around and haven't seen any pics of the internals of the trigger box. I would look around for some VSR10 trigger box pictures. As it is a direct clone of the VSR.

Good luck

 

[woogie]

Are you sure ?? All of the springs are there, not broken or bent?

If there is nothing wrong you may need a new trigger assembly.

 

[woogie]

It depends on what type you get ..... Though it may be cheaper to find a used rifle and take it from that rifle. You could always look at the zero trigger.