[dagath]

iv'e just bought the JG bar 10, and have NOT made any mods yet.

The problem is that i am getting double or triple loading when i cock the rifle? anyone have this issue and know how to solve it?
obviously if i had wanted a shotgun i would have bought one

" title="" border="0"/>

iv'e used .25 and .20 BBs and the problem remains. also i have fiddled about with the hop-up with no success.

any help or suggestions would be great!
thanks in advance
d

 

[dagath]

yep have reassembled the gun correctly, however the problem remains and started the first time i used the gun before any disassembly had taken place.

i have noticed that if i put alot of upward pressure on the mag during the cycle process it counter acts the problem. also when i adjust the hop up to it max (all the way back toward the trigger)
it also helps. problem there is obviously that the bbs go drastically skyward

" title="" border="0"/>

as suggested the mag may have a fault but it does seem to be in good condition.

as far as i can tell it should be fine, yet here i am looking for advice.

Thx so far, every bit helps!