Airsoft Sniper Forum banner
1 - 20 of 38 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter · #1 ·
Well last year I purchased a bar 10 with a custom bull barrel off of woogie. It had a huge 9in. silencer on the end that is 2 1/2 in in diameter.


Here is a pic of the rifle without the silencer.

A 303 mm barrel will reach to the inside of the silencer. Well now that you now all the back-story, i'll let you know what is planned for the build.

In august I have two major games to attend: OP Tailwind (24 hours) and Blind Fury 8 (8 hours). In both of these games, I wanted to build a new scout sniper rifle that would be extremely accurate and would be around 450 F.P.S. Here is what I have planned.

All PDI parts
http://www.airsoftatlanta.com/RAVEN_PDI_VSR_10_Custom_Cylinder_Set_p/64011.htm?1=1&CartID=1

PDI Barrel
http://www.airsoftatlanta.com/ProductDetails.asp?ProductCode=65147&CartID=2

PDI Sear
http://www.airsoftatlanta.com/ProductDetails.asp?ProductCode=65330&CartID=3

BB's
http://www.airsoftatlanta.com/ProductDetails.asp?ProductCode=00166&CartID=4

I am going to completely silence the rifle along with other mods. Since I'm using all raven partsand the rifle is very silent, It has been named Silent Raven.

When my parts get here and my other bar 10, I'll post pics and before and after shooting, also how the pdi hop up works.
 

·
Registered
Joined
·
222 Posts
Discussion Starter · #7 ·
Yeah woogie, it's been chilling in my basement for over a year now just waiting for me not to be dirt broke :).

Sorry man, I can't sell them. I haven't even ordered it yet.
 

·
Registered
Joined
·
222 Posts
Discussion Starter · #15 ·
Here is a picture of the rifle that I'm starting with.



I finished mounting the cheek adjuster this evening.



The silencer



Other side of the cheek adjuster



I have a whole bar 10 coming this week to finish off all the parts I don't have, and next week I order all of my upgrade parts.


Although, I think I will return to my regular length outer barrel.
 

·
Registered
Joined
·
222 Posts
Discussion Starter · #16 ·
Update

Today I decided to work on the parts I had already, so first I worked on the hop up. I took black electrical tape and shimmed the sides of the hop up. You may notice that I didn't cut out a few spaces, but don't worry it is all for a reason.



Then I drilled a small hole on the outer barrel



As you can see, the hop up arm is now visible from the outside of the rifle.



Then I found an appropriate bolt and nut, in my case a sling mount screw



Lastly, I glued the nut on the top of the barrel. I am slowling adding glue to make the nut flush with the barrel, but I'll add more pictures when all the glue is dry.



By now, you know that I'm making my hop up adjustable by just turning this small knob.

Today I also filled the stock with clay.
 

·
Registered
Joined
·
222 Posts
Discussion Starter · #20 ·
Thanks guys for all the feedback. I'll show you guys in depth how to do it in the next few days.

Ct- I'm not using that arm. It is my m28 arm that I was using or a reference.

Mgunner- I have a few extra barrels, so I'll make one this week with my HD camera, and if you guys want I'll make a video.

Also I'm adding a small spring to the hop up ark to put some back pressure on the bolt.
 
1 - 20 of 38 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top