[Mullinscj]

Hey Guys,
I just got into sniping and I've been reading a whole bunch of threads about the BAR-10. I have put together a list of parts that I am going to order, can you guys let me know if these parts are ok and if they are going to work together well? Thanks in advance.

New Part List after Discussion in Comments:
Action Army Specialized Zero Trigger for VSR 10 / BAR 10 (comes with the piston)
Maple Leaf Diamond Rubber Hopup for TM/WE GBB Pistol & VSR (60)
Maple Leaf RTX Concave Hop Up Nub for AEG
PDI Precision Inner Barrel for BAR 10/VSR 10 (433mm)
Maple Leaf VSR10 Spring Guide
PDI 160 Spring for VSR 10 / BAR 10
Action Army CNC Aluminum Perfect Hop Up Chamber ( VSR-10 / Bar-10 )
Masamune Teflon Coated Cylinder Kit for VSR 10 / JG BAR 10 / R700 / G700

 

[Reliku]

Don't buy store brand parts, they're usually bad. The AA stuff is good but I'd also recommend an AA chamber. Then get a good barrel and bucking (AA and maple leaf is my personal recommendation) and you're good to go. But avoid airsoft GI's own "extreme precision" barrel :hehe:

Also make an intro post by the way, it's a forum rule :tup:

 

[Mullinscj]

Don't buy store brand parts, they're usually bad. The AA stuff is good but I'd also recommend an AA chamber. Then get a good barrel and bucking (AA and maple leaf is my personal recommendation) and you're good to go. But avoid airsoft GI's own "extreme precision" barrel :hehe:

Also make an intro post by the way, it's a forum rule :tup:

Ok so I made some changes
PDI 160 Spring for VSR 10 / BAR 10
Maple Leaf VSR10 Spring Guide
Laylax PSS10 VSR 10 430mm Precision Barrel
Maple Leaf Diamond Rubber Hopup for TM/WE GBB Pistol & VSR (60)
Action Army CNC Aluminum Perfect Hop Up Chamber ( VSR-10 / Bar-10 )

I don't know which maple leaf bucking to get (50, 60, 90, etc) what would you suggest?

 

[Reliku]

I would suggest a 60 or 70 degree "monster" bucking.

Bear in mind however that you will need an open barrel window for the ML to work, so if you go with a laylax barrel (which has a closed window, bridged) you will need to remove the bridge yourself.

Also don't forget to buy the maple leaf concave nub with it, by the way :tup:

 

[Oddsyns]

I maybe wrong but, I think that you don't need to buy the hop up arm if you are going to use the AA chamber.

I'd suggest EDGIs barrel as well, specially if you are going to do some Rhoping