Airsoft Sniper Forum banner

Question about Prometheus IB for Type 96

1325 Views 7 Replies 4 Participants Last post by  SilentScope
I'm planning to get a Pdi Hop Up Chamber and I was curious if all the Prometheus AEG 6.03 Tightbore Barrels were drop-ins. Do they require any modifications at all?

Also for anyone who does have a UTG Type 96 or similar model, what should be the desired length of the inner barrel?
--I hear too short does not use enough of the potential energy (lower fps), while too long actually has no use.
1 - 2 of 8 Posts
It is a patch that covers the barrel window, that offers superior hop due to the fact that it stabilizes the round better, applying hop over a distance. The r-hop is shorter, while the er-hop requires cutting of the hop window. The ER-hop is better for heavy rounds, and just in general, while the r-hop is better for people running short on cash.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.