Airsoft Sniper Forum banner

Question about Prometheus IB for Type 96

1328 Views 7 Replies 4 Participants Last post by  SilentScope
I'm planning to get a Pdi Hop Up Chamber and I was curious if all the Prometheus AEG 6.03 Tightbore Barrels were drop-ins. Do they require any modifications at all?

Also for anyone who does have a UTG Type 96 or similar model, what should be the desired length of the inner barrel?
--I hear too short does not use enough of the potential energy (lower fps), while too long actually has no use.
1 - 1 of 8 Posts
Just get a silencer adapter. I wouldn`t cut the barrel. Unless you can cut it perfectly with out leaving like burrs on it.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.