Airsoft Sniper Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I was looking to really push the performance of my echo 1 asr.. i already got my 6.01 tightbore and bucking, but i am looking for a little more. Instead of buying an upgrade kit, i looked into getting the sp190 spring and new trigger sears, both made by angel custom. Is this a good idea?
 

·
Registered
Joined
·
384 Posts
Angel Custom Springs are one of the worst springs I've ever used. I own a m170 (5k+ shots) and an m190. They shoot 440 and 520 FPS respectively.

The m190 shot out of the package 510-540 FPS!

I own many other springs to check if the lower than expected FPS is my rifle's issue, but it's definitely the AC spring's bad quality.

My Laylax m170= 580 FPS
My Laylax m210= 670 FPS


I highly recommend to NOT buy Angel Custom Springs. ever. period.
 

·
Registered
Joined
·
2,893 Posts
The point of the 500fps limit is to limit joules. Even if you use heavier bbs to lower the fps, the joules will be higher because of the increased mass of the bb. Either way, I'm pretty sure they always test with .2g bbs from the start. I suggest geting the sp150 spring for field battles and sp170 spring for home shooting if you must have more than 500fps. But the sp190 is too powerful for any purpose you have for a powerful gun.
 

·
Registered
Joined
·
2,893 Posts
Why shouldn't he g with angel custom? It's what I'm using and it seems to work fine for me. Maybe I just got lucky with this one? :shrug:

and kella, try evike or airsoft atlanta.
 

·
Registered
Joined
·
384 Posts
Why shouldn't he g with angel custom? It's what I'm using and it seems to work fine for me. Maybe I just got lucky with this one? :shrug:

and kella, try evike or airsoft atlanta.
Chrono the m170. If you're shooting 550 FPS or above then you're fine.

The reason Angel Customs springs are not recommended is because they compress too quickly.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top