Airsoft Sniper Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter · #1 ·
Hey guys, I'm new here. I'm starting to get more and more interested into a DM/Sniping hybrid kind of role. I've been playing airsoft for about a year now. I used to carry nine or ten mags, but I'm slimming down for this role. Just three.

001 by tjstivers, on Flickr

The belt is an ATS War belt in MC. The Dumper is a mexpedition rolly poly, mag pouch is Tac. Tailor, and the GP pouch is Specter Gear. I love the suspenders, much better for crawling and running than a belt alone, they're also ATS.


005 by tjstivers, on Flickr

Here's a picture showing how it fits together with my new ghillie. It blends very well, and the hanging jute covers up the back end very well.


004 by tjstivers, on Flickr


006 by tjstivers, on Flickr

This is my rifle for the time being. It's a KWA SR-10 with an A2 stock. The A2 is great, it makes no noise, and there is no play. I'm still working on the rifle rag, I'll update with pictures when it is completed. Don't worry though, I'll be receiving an M14 next week that will be built for this role.

Questions? Comments? Concerns.
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #3 ·
The KWA is just a stop-gap. I'll get some glass on the M14 though, probably in a month or so. I'm thinking a Tasco 3x9x40 with some generic rings.

I forgot to mention. The ghillie is stored in a Condor hydro carrier while in the staging area. I don't want the other team knowing that I'm acting almost exclusively as a sniper. It rolls up good and tight, then I just tie it into a bundle and toss it in.
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #5 ·
I'm not sure about a sidearm. Because the M14 an SR-10 can both fire semi-auto, and mags are quick to reload. I'll play the role for a while to better adapt to it's required pieces of gear and equipment.
 

·
Registered
Joined
·
362 Posts
That is best scope for a budget in my opinion, but get some Barska rings for 8.99 from Walmart. They are made for real guns so they are less probable to break then the generics.

Very nice set-up. It looks great. Just put on some foliage and some gloves and you'll be golden. It looks comfortable too.
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #8 ·
While I didn't get a chance to bust out the ghillie at today's game, I did give this gear a go. I found that it was very effective. I was able to crawl through high grass all day without being noticed, and racked up some impressive kills.

I definitely need gloves and something to cover my face. I felt like I had a rash from my lips to my shirt line. Any products you guys would suggest?
 

·
Premium Member
Joined
·
3,494 Posts
roguewolf said:
I definitely need gloves and something to cover my face. I felt like I had a rash from my lips to my shirt line. Any products you guys would suggest?
I wear one of these:
http://www.airsoftpost.com/product_info.php?cPath=30_151&products_id=24343

Underneath, I wear a padded foam protection piece. Helps protect my face from being shot up, as the balaclava by itself will not stop the bb from breaking skin: http://www.airsoftpost.com/product_info.php?cPath=30_151&products_id=29010

Now this foam piece looks mad funny, and after wearing it I realized it needed to be cut. I cut around where my goggles are and along the siding to make it more comfortable. With most of the area around the goggle removed, it has become a very effective piece for protecting my face.
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #10 ·
Well, I got this beauty last week. I've done most of vindi's guide except for the AOE and a few other gearbox tweaks. I have to say, I love the hop up. With .28's, you could easily reach out to 200'.


If anybody has a scope and mount for it, please P.M. me. I don't want to order from Evike.
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #12 ·
I finally got some glass for her. The optic is a rubberized Leapers 3x9x40 and the mount is a TM mount. You can also see the rifle rag in these pictures. The only difference now is that she has an SCS and several kills to her name. Unfortunately, I haven't gotten a chance to skirmish with the optic.


003 by tjstivers, on Flickr

001 by tjstivers, on Flickr

002 by tjstivers, on Flickr

004 by tjstivers, on Flickr

005 by tjstivers, on Flickr

The rifle rag is held on with rubber bands, which are also used to add veg. It's made from a piece of off brown cloth with holes poked in it and burlap put through those. There are lots of bald patches, but I wanted to keep it low profile, as I do lots of crawling.
 

·
Registered
Joined
·
48 Posts
Discussion Starter · #15 ·
Some low profile rings would compliment it nicely. The woodland deal on the buttstock is covering my ghetto riser. AKA a mock supressor and athletic tape. I wanted to make it more aesthetically pleasing.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top