[flash93]

When you do R-Hop, will you be able to adjust the hop up?

---
I am here: http://maps.google.com/maps?ll=34.641842,-92.448344

 

[rcnsasquatch]

You should be able to.

Sent from my HTC_Amaze_4G using Tapatalk

 

[sniperelite7]

Yes you will be able to adjust the r-hop once installed. You just need to file down the channel and tune for a minimum bb weight in mind.

 

[Cheese Man]

Yes, if you do it right, or have a pro do it for you.

 

[flash93]

Do I have to get the M-Nub or is SCS just fine?

 

[akfortyseven]

You have to get something that pushes down on the whole patch. You can't use a SCS with an R-hop.

 

[flash93]

You have to get something that pushes down on the whole patch. You can't use a SCS with an R-hop.

And what would that be?

 

[akfortyseven]

An m-nub...

EDIT: Or possibly this:
http://www.Airsoftatlanta.com/Airsoft_Firefly_Buffer_Rubber_for_AEG_Hard_p/63315.htm

 

[flash93]

Do I need a special hop up or is a regular M16/M4 hop up good

 

[bobgengeskahn]

It would appear that ASM made their forum members only... but there is still tons of information out there using google... I would go into some detail answering your questions, but it just start a battle that has already been fought elsewhere on the internet... including here...

http://www.airsoftsociety.com/forums/f97/r-hop-flat-hop-discussion-31875/

http://www.spokaneairsoft.com/index...=18&id=11965&limit=10&limitstart=10&Itemid=87

 

[Cheese Man]

You can do it with a regular hop, but it might need some modification.