Airsoft Sniper Forum banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
2,311 Posts
Discussion Starter · #1 ·
After some research, I noticed that a lot of people really like Palmers stabilizers. I have seen these things;
http://palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=75&products_id=822
http://palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=75&products_id=824
http://palmer-pursuit.com/cart/index.php?main_page=product_info&products_id=185

And I was wondering if one of them would work, or if a few of them used in conjunction with one another would work, or if there are any better suggestions just in general.

NOTE: I own a KJW M700, if that makes a difference.
Any help is appreciated.
 

·
Registered
Joined
·
292 Posts
That will work but their regs are convoluted IMO. I don't see the point of a ASA On/Off when a valved quick disconnect fitting would do the same and would be quicker. I would not spend $100 ++ on an air rig for a CO2 adapter. Look into 13ci Ninja tanks if space is a problem. Mcmastercarr has a ton of parts if you want to build your own rig but Austinwolv on classic airsoft forums offers a very nice dual regulated air rig for $200 pre-built. There is a list of parts in this thread linked below. It should give you what you want plus some. http://www.airsoftsniperforum.com/phpBB/phpBB3/viewtopic.php?t=1791
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top